• High Viscosity Heavy Duty Cleaner & Problem Solver
• Helps Remove Red Soil, Smoke, Soot & Hydrocarbons
• Effective on Rust, Bore Water Stains & Mineral Deposits
• Helps Renew Heavily Polluted Facades & Retaining Walls

Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use

PRECAUTIONS

1. Read entire label, SDS & technical bulletin before using;
2. Wear appropriate skin & eye protection & use in a well ventilated area;
3. Surface must be clean, dry & free from any sealers & coatings;
4. Use when surface temperature is between 4°C & 32°C;
5. Do NOT mix with other chemicals or allow contact with any non-recommended surfaces;
6. Do NOT use on acid sensitive or polished surfaces;
7. Do NOT mix in metal containers;
8. Remove all metal jewellery before using;

INSTRUCTIONS

1. Sweep, vacuum, or wipe surface;
2. If the surface is very porous, slightly pre-wet surface with water;
3. Dilute Blast HD as follows:
   • a) LIGHT: Mix 1 part product to 8 parts water;
   • b) MODERATE: Mix 1 part product to 5 parts water;
   • c) HEAVY: Mix 1 part product to 3 parts water;
   • d) EXTREME: Mix 1 part product to 1 part water or use neat;
4. Carefully apply solution to surface with a sponge, roller or mop;
5. Allow minimum dwell time of 10 minutes – up to 30 minutes
6. DO NOT ALLOW THE PRODUCT TO DRY ON THE SURFACE;
7. Scrub with a white nylon pad, scrub brush or scrub machine;
8. Remove the dirty solution with a wet vac or mop;
9. Rinse thoroughly with clean water;

• Heavily soiled surfaces may require longer dwell time and or stronger solution;
• Some stained surfaces may require resurfacing or replacing.