Davco Ultraflex Pro Premium Grade Cement Based Tile Adhesive 20Kg
A premium grade, flexible, cement based, rubber modified cement based tile adhesive suitable for a variety of substrates.
- Commercial grade
- Thick or thin-bed applications
- Low VOC
Usage
Davco® Ultraflex Pro is suitable for both thin & thick-bed tiling applications. Davco® Ultraflex Pro is suitable for use internally & externally of both wall and floor substrates. Suitable substrates include;
- Concrete Minimum 7 days old at 22°C
- Screeds minimum 24 hours old at 22°C
- Fibre cement sheeting
- Compressed cement boards
- Extruded cement boards
- Sika / Davco approved waterproof membranes
- Rendered block or brickwork
- Under-tile heating systems
- Timber floors (sheeted with fibre cement sheeting)
Suitable Tile Types include;
- Ceramic
- Porcelain
- Mosaic
- Slate & Quarry Tiles
- Natural Stone (non moisture sensitive or translucent)
- Terracotta
Packaging
20kg Bags / 64 per pallet
Advantages
- Commercial grade
- Thick or thin-bed applications
- Low VOC
- Flexible S1 Performance
- Extended open time
- Non slump
- For rigid & flexible (framed) substrates
Colour
Off white powder with rubber crumb particles.
ENVIRONMENTAL INFORMATION
Low VOC 5g/L (SCAQMD Method 304-91)
Mixing Ratio
6-7 Litres of clean potable water per 20kg bag.
Layer Thickness
Maximum Layer thickness shall be no greater than 10mm.
Ambient Air Temperature
Min +5°C to Max 35°C
Substrate Temperature
Min +5°C to Max 35°C
Pot Life
1.5 Hours
Open Time
30 Minutes
Adjustability Time
20 Minutes
Applied Product Ready for Use
|
Set time before grouting |
6-8 hours |
|
Set time before dry area service |
24 hours |
|
Set time before wet area service |
2 days |
All measurements are taken at 22°C & 50% relative humidity. Specifications vary according to site conditions and should be taken as a guide only.
Consumption
A 20kg bag covers approximately 12m2 with a 6mm notch trowel.
Shelf life
12 Months from date of manufacture.
Storage conditions
Store in dry cool conditions out of direct sunlight off ground.
*High humidity will reduce shelf life.
Product Declaration
C1ES1 AS ISO 13007 Classification.
We offer shipping Australia wide
You may also like
More from Davco
More from Silicone/Glue
Recently viewed